The ability to expand greatly and to return quickly is what distinguishes a rubber from a plastic. This property not only makes possible the catapult but also allows designers to use rubbers to supply constant forces, either in tension or compression.
High quality rubber compounds will remain elastic for their full design lives, virtually irrespective of the movement cycles they undergo. However, all rubbers will relax to some extent under constant deformation and this should be specified if significant.
Where rubber is to be used continuously in tension, consideration should be given to the effects of failure and trials carried out as required.
All rubber types are elastic. Natural rubbers are tough and strong but may have limited life if exposed to ozone or sunlight. Thermoplastic rubbers generally have lower elasticity and the softer grades relax when deformed, giving rise to permanent set.
"ONGC - Oil and Natural Gas Corporation Limited" - Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.
"Mr Mohammed Al Duaigy" of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.
"McCafferty BM Design Ltd, KENT United Kingdom" - Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive elastomer is the best for all applications. We trust Mr Nilesh chodhari completely for all our O rings designing applications.
"Dr. A. Singh" of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn't tear. We have been using since 5 years and still didn't generate any fatigue. They arranged bulk delivery in short period.
"Tata Steel" - One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
© Mech Spares Pvt. Ltd. All rights reserved.
Website Design by EWEBAC